Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Dacia Sandero?

Model: Dacia Sandero B8 - Years 2012-2020
Part: Tire pressure warning light

To reset the tyre pressure warning light on the Dacia Sandero, insert the key and turn on the ignition. Navigate through the menu that appears on the display using the button with three dots located at the end of the lever to the right of the steering wheel. When "Set TP" appears, press and hold the button with three dots until the message stops flashing and the tyre warning light turns off. After the reset, turn off and then turn on the ignition to ensure the warning light is off.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on a Dacia Sandero?
How do you reset the tire pressure warning light on a Dacia Sandero?
Dacia Sandero (2021-2026 / MK 3) On the instrument panel of the Dacia Sandero, it will be possible to completely turn off the tire pressure warning light by first inflating the tires…
How to reset the tyre pressure warning light on the Dacia Sandero?
How to reset the tyre pressure warning light on the Dacia Sandero?
Dacia Sandero (2021-2026 / MK 3) To reset the tyre pressure warning light on the Dacia Sandero, inflate all the tyres to the pressure indicated on the label on the driver's door. Onc…
How to reset the tyre pressure warning light on a Dacia Sandero?
How to reset the tyre pressure warning light on a Dacia Sandero?
Dacia Sandero (2012-2020 / B8) To reset the tyre pressure warning light on a Dacia Sandero, insert the key into the lock and turn it to activate the instrument cluster. Then, repea…

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2021-2028 - How do you reset the tire pressure warning light on the Dacia Sandero Stepway? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos