Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Duster
    4. : Replacing the cabin filter on Dacia Duster

Dacia Duster - Video tutorial

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Cabin air filter
Operation: Replacing the cabin filter on Dacia Duster

The cabin or pollen filter is used to stop fine dust coming from the outside and entering the passenger compartment. Its replacement is necessary to avoid dangerous inhalations. On Dacia Duster the cabin filter is located under the dashboard on the passenger side, to replace it you will not need to remove the drawer but only remove the side plastic. Once removed, the filter will be in a vertical position to the left. Take it out of the handles and dispose of it properly. Now you can install the new filter, taking care to insert it so that the plastic side is on the outside.


Posted on 13 May 2024 by ScegliAuto



How to replace the cabin filter of the Dacia Duster.
Dacia Duster (2010-2017 / HS, MK 1) If you need to replace the cabin air filter in your Dacia Duster Mk1 (year 2010-2017) but don't know how to do it, all you have to do is carefully re
Procedure for replacing the cabin filter in a Dacia Duster II
Dacia Duster (2017-2024 / HM, MK 2) In this video tutorial we can see the procedure for replacing the cabin filter in a Dacia Duster II by following a few simple steps: the first thing
How to replace the cabin filter of the 2015 Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) If you do not know the steps to follow to correctly complete the replacement of the cabin air filter in your first series Dacia Duster (year 2015), t

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos