Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Maintenance Service of the 2019 Dacia Duster

Model: Dacia Duster HM, MK 2 - Years 2017-2024
Part: Warning light – error code

This video shows you how to reset the maintenance service of the 2019 Dacia Duster. To reset the maintenance system, insert an OBD diagnostic device into the designated socket located on the left side of the steering wheel, towards the bottom. Next, download the most suitable diagnostic application for your car onto your PC. There are several available on the market. Now, sync the OBD device with the installed application via Bluetooth and start selecting the car manufacturer's brand, the diagnostic function, the specific fault indicated by the system, and proceed with the reset.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Duster (2017-2024 / HM, MK 2) In this video we can see how to reset the maintenance on the Dacia Duster MK2: turn on the instrument panel, and use the arrow buttons up/down to scr…
Dacia Duster (2017-2024 / HM, MK 2) In this video, we can see how to reset the service light on a Dacia Duster MK2: first, ensure the vehicle is in neutral, then turn on the ignition. P…
Dacia Duster (2017-2024 / HM, MK 2) Resetting the service light on the Dacia Duster, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensure all requi…

Other guides you may be interested in

    Frequently Asked Questions

    • Duster 2017-2024 - How to recover the radio code of a Dacia Duster? Read answer
    • Duster 2017-2024 - What is the meaning of the red lights on the Dacia Duster? Read answer
    • Duster 2017-2024 - What does the Dacia Duster zigzag line warning light mean? Read answer
    • Duster 2017-2024 - What to do if the anti-pollution warning light comes on on the Dacia Duster? Read answer
    • Duster 2017-2024 - What are the spies of the Dacia Duster? Read answer
    • Duster 2010-2017 - Where to find the radio code on Dacia Duster? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos