Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Duster
    4. : How to reset the tire pressure warning light on Dacia Duster

Dacia Duster - Video tutorial

Model: Dacia Duster HM, MK 2 - Years 2017-2024
Part: -board computer
Operation: How to reset the tire pressure warning light on Dacia Duster

If despite having just checked the tire pressure, the annoying orange light continues to flash on your Dacia Duster, you should follow these simple instructions to carry out a reset. With the key inserted, the ignition on and the engine off, press the small button located on the lever to the right of the steering wheel, the one of the windscreen wiper, to scroll through the menu items displayed in the center of the dashboard. When the message â € œSET TPâ € appears, press the same button again and keep it pressed until the message stops flashing. At this point the light will go out.


Posted on 11 November 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Duster 2017-2024 - What do the dashboard indicators of the Dacia Duster indicate? Read Answer
    • Duster 2010-2017 - Why is the DAB radio in the Dacia Duster not working? Read Answer
    • Duster 2017-2024 - How to reset the tire pressure warning light on Dacia Duster 2019? Read Answer
    • Duster 2017-2024 - Where do i find the car radio code on Dacia Duster? Read Answer
    • Duster 2017-2024 - What does the orange warning light mean in the Dacia Duster? Read Answer
    • Duster 2017-2024 - Where is Cruise Control on the Dacia Duster activated from? Read Answer
    • Duster 2010-2017 - How to retrieve and enter the code in Dacia Duster? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos