Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Car Radio in the Dacia Sandero?

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Car stereo

See other generations:
Video tutorial

In this tutorial, see how to replace the car radio in the Dacia Sandero, a very simple and quick operation. First, ensure the key is not inserted, then remove the radio frame by prising it out with a plastic spatula.

Once done, disconnect the connector at the back and, using a Torx T20 screwdriver, unscrew the 4 mounting bolts of the radio. At this point, grasp the unit, pull it towards you, and remove it from the housing.

After disconnecting each rear connector, you can fit the replacement by following the reverse procedure.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Activate and Deactivate Bluetooth in the Dacia Sandero Radio
How to Activate and Deactivate Bluetooth in the Dacia Sandero Radio
Dacia Sandero (2012-2020 / B8) The Bluetooth technology in the stock radio fitted in your Dacia Sandero Mk2 allows you to listen to your favourite tracks from your smartphone or an…
How to Replace the Car Radio in a Dacia Sandero?
How to Replace the Car Radio in a Dacia Sandero?
Dacia Sandero (2012-2020 / B8) In this tutorial, see how to replace the car radio in a Dacia Sandero, a very simple operation. First, pry off the radio frame using a plastic spatul…
How to Replace the Standard Radio of the Dacia Sandero
How to Replace the Standard Radio of the Dacia Sandero
Dacia Sandero (2012-2020 / B8) Below are the instructions to remove and replace the standard radio of the Dacia Sandero, as well as the Duster and Logan. First, get inside the vehi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos