Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the Service Light on a 2019 Dacia Duster

Model: Dacia Duster HM, MK 2 - Years 2017-2024
Part: Warning light – error code

The video shows how to reset the service light on a 2019 Dacia Duster. The operation is simple and requires only a few steps. First, turn the key to the first click (position 1). Use the arrow buttons on the steering wheel to navigate the menu that appears on the display. Find the SERVICE INTERVALS option. Hold down the down arrow for at least 5 seconds. Then, repeat this operation. The next service reset should be performed after one year. Turn off and restart the ignition to check that the reset was successful.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Duster (2010-2017 / HS, MK 1) Learn how to reset the oil change service light on a Dacia Duster, applicable to most Dacia and Renault models. First, get in the vehicle and press t…
Dacia Duster (2017-2024 / HM, MK 2) The following steps will show us how to reset the maintenance service light for the oil change on the Dacia Duster. First, we get into the car and st…
Dacia Duster (2017-2024 / HM, MK 2) Here are the step-by-step instructions to reset the service light for the routine maintenance oil change on the Dacia Duster, as well as the Sandero.…

Other guides you may be interested in

    Frequently Asked Questions

    • Duster 2017-2024 - How to recover the radio code of a Dacia Duster? Read answer
    • Duster 2017-2024 - What is the meaning of the red lights on the Dacia Duster? Read answer
    • Duster 2017-2024 - What does the Dacia Duster zigzag line warning light mean? Read answer
    • Duster 2017-2024 - What to do if the anti-pollution warning light comes on on the Dacia Duster? Read answer
    • Duster 2017-2024 - What are the spies of the Dacia Duster? Read answer
    • Duster 2010-2017 - Where to find the radio code on Dacia Duster? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos