Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Dacia Duster

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Tire pressure warning light

To reset the tyre pressure warning light on a Dacia Duster, insert the ignition key into the ignition switch and turn it to activate the instrument cluster. Once on, press the button located at the end of the lever to the right of the steering wheel several times until the message "Set TP" appears: when this message appears, press and hold the button. The message will start to flash, and when it disappears completely, the tyre pressure warning light will also turn off.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure sensor of the Dacia Duster
How to reset the tire pressure sensor of the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) In a few simple steps, we will see how to reset the tire pressure warning light (TPMS) of the Dacia Duster; before performing the reset, it is necess…
How to reset the tire pressure warning light on the Dacia Duster
How to reset the tire pressure warning light on the Dacia Duster
Dacia Duster (2024-2026 / P1310) Today's instructions will allow us to reset the tire pressure warning light of the Dacia Duster; before performing the reset of the TPMS sensors, it …
How to Reset the Tyre Pressure Light on a Dacia Duster
How to Reset the Tyre Pressure Light on a Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) Before starting, sit in the driver's seat of your Dacia Duster. Begin by activating the instrument panel by pressing the ignition button. Then, repea…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos