Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of the Dacia Sandero?

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Body

See other generations:
Video tutorial

To open the bonnet of the Dacia Sandero, go inside the cabin and locate the lever on the lower left side of the dashboard, next to the steering column: once this lever is pulled, you will notice that the bonnet has been released. Then, exit the vehicle and reach for the bonnet lock actuator: by moving it to the left, you can fully open the bonnet and access the components inside the engine bay. To close it, simply lower the bonnet until the actuator locks it.


Updated on 23 June 2026 by ScegliAuto


Related tutorials

How to Lift the Bonnet of a Dacia Sandero
How to Lift the Bonnet of a Dacia Sandero
Dacia Sandero (2008-2012 / BS) Learn how to lift the bonnet of your vehicle. Open the bonnet of a Dacia Sandero. Open the door (driver's side); pull the lever located at the bottom…
How to Perform Checks on the Dacia Sandero
How to Perform Checks on the Dacia Sandero
Dacia Sandero (2021-2026 / MK 3) In today's video, learn how to perform maintenance checks on the Dacia Sandero. First, we recommend working with a cold bonnet to avoid unpleasant bu…
How to Replace the Front Headlamp Bulb on a Dacia Sandero Mk1
How to Replace the Front Headlamp Bulb on a Dacia Sandero Mk1
Dacia Sandero (2008-2012 / BS) Replacing the front headlamp bulb on your Dacia Sandero Mk1 is very simple, and with the following guide, you will be able to complete the entire mai…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos