Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : How to reset the tire warning light in Dacia Sandero?

Dacia Sandero - Video tutorial

Model: Dacia Sandero B8 - Years 2012-2020
Part: Tires
Operation: How to reset the tire warning light in Dacia Sandero?

Resetting the tire warning light in your Dacia Sandero, as we can see in this tutorial, is an extremely simple and fast operation. Before proceeding, make sure that you have restored the correct pressure of each tire by following the instructions given in the manual. We start by inserting the key and turning on the instrument panel, after which we repeatedly press the button located at the end of the right control lever until we reach the "SET TP" screen. At this point, hold down the same button for about 10 seconds, or in any case for the time necessary for the warning light to reset correctly.


Posted on 3 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Sandero 2012-2020 - What does the orange light with an exclamation mark in the center mean in the Dacia Sandero? Read Answer
    • Sandero 2021-2028 - What to do if the tire warning light comes on on the Dacia Sandero? Read Answer
    • Sandero 2012-2020 - What does the warning light with an exclamation point in a tire mean in the Dacia Sandero? Read Answer
    • Sandero 2008-2012 - How does the tire warning light work on Dacia Sandero? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos