Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : How to replace the taillights in a Dacia Sandero Stepway

Dacia Sandero - Video tutorial

Model: Dacia Sandero B8 - Years 2012-2020
Part: Tail light
Operation: How to replace the taillights in a Dacia Sandero Stepway

In this video tutorial we are going to see how it is possible to replace the taillights in a Dacia Sandero Stepway by following a few simple steps: first lift the tailgate and then looking inside, behind the taillight we will see what is It's a screw that needs to be unscrewed. Once you have unscrewed the screw, you can very gently remove the taillight. Once you have removed the taillight, you need to unplug the connector (just squeeze underneath and it will come off). Once the rear light has been removed, let's install the new rear light; first it would be better to clean the area from dust with a cloth. Reassemble all the parts by proceeding in reverse order. Do the same job with the other taillight as well.


Posted on 5 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos