Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Dacia Sandero

Model: Dacia Sandero B8 - Years 2012-2020
Part: Service warning light

To reset the service light on a second-generation Dacia Sandero, produced from 2012 to 2020, first turn on the vehicle's ignition. The display will immediately show the wrench icon indicating maintenance is due. To remove it, press and hold the end button on the lever located on the right side of the steering wheel. The light will start to flash. Keep the button pressed until the light stops flashing, indicating the reset has been successfully completed. Then, turn off and restart the vehicle to verify the reset.

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Dacia Sandero?
How do you reset the Service light on the Dacia Sandero?
Dacia Sandero (2012-2020 / B8) To reset the Service light of the Dacia Sandero, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: …
How to Reset the Service Light on a Dacia Sandero?
How to Reset the Service Light on a Dacia Sandero?
Dacia Sandero (2012-2020 / B8) You can reset the Service light on a Dacia Sandero by inserting the key into the ignition. Once the dashboard is powered on, navigate through the men…
Resetting the Service Light on a Dacia Sandero
Resetting the Service Light on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) In this tutorial, you will see the instructions and steps to follow to reset the service light for the regular maintenance oil change on a second-gen…

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2012-2020 - What does the "Service" warning light on a Dacia Sandero Stepway mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos