Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radio Fuse in the Dacia Sandero

Model: Dacia Sandero MK 3 - Years 2021-2026
Part: Car stereo

In this video, check what to do if the radio in your Dacia Sandero stops working: verify that it is not due to a blown fuse. You will find the fuse box on the side of the dashboard, covered by the driver's door when closed. Remove the plastic cover, and to identify the relevant fuse, consult the diagram in the owner's manual: it will be the third from the bottom, on the left, blue, rated at 15 A. Extract it, replace it with a new one, and turn on the radio to check if the operation was successful.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the low beam headlight fuse located on the Dacia Sandero?
Where is the low beam headlight fuse located on the Dacia Sandero?
Dacia Sandero (2008-2012 / BS) The low beam headlight fuse of the Dacia Sandero is located inside the fuse box behind the left side panel. The fuse is number F4 for the right headl…
Where is the fuse for the Dacia Sandero's power window located?
Where is the fuse for the Dacia Sandero's power window located?
Dacia Sandero (2012-2020 / B8) The fuse for the front window regulator of a Dacia Sandero mk2 model car is located inside the fuse box located behind the left side dashboard panel.…
How to Replace a Fuse in a Dacia Sandero
How to Replace a Fuse in a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before you can start, open the driver's door of your Dacia Sandero. Next, unclip and remove the side cover of the fuse box. This will give you access…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos