|
Do it yourself
| |||
| ||||
How the Tyre Pressure Monitoring System Works on Dacia Duster
Model: Dacia Duster
HM, MK 2
- Years 2017-2024
In this video, you will see how the tyre pressure monitoring system works on the Dacia Duster, which monitors tyre pressure by measuring the wheel speed during driving. If one of the tyres loses pressure, the TPMS light on the dashboard will illuminate, indicating that the pressure of all four tyres should be checked, referring to the pressure indicated on the label located on the driver's door. Remember that the measurement should always be taken when cold. If you have changed a wheel, used the inflation kit, or your vehicle is heavily loaded, you need to reinitialize the reference pressure value: select the "set TPW" option using the up/down buttons, then press the button for about 3 seconds to initiate reinitialization, which will be effective after a few minutes of driving. If the light comes on again, it means the procedure needs to be repeated. If it flashes multiple times and then stays on, accompanied by other orange lights, it indicates a problem in the system that needs to be checked at the dealership.
Updated on 10 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Dacia Duster
(2024-2026 /
P1310)
To reset the tire pressure light on a Dacia Duster, turn on the instrument panel without starting the engine. Use the touchscreen of the central onbo…
Dacia Duster
(2017-2024 /
HM, MK 2)
If the pressure of one of the tires on the Dacia Duster drops, an orange icon in the shape of a tire section with an exclamation point will appear on…
Dacia Duster
(2017-2024 /
HM, MK 2)
Before starting, sit in the driver's seat of your Dacia Duster. Begin by activating the instrument panel by pressing the ignition button. Then, repea…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.068
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |