Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure on the Dacia Duster 2

Model: Dacia Duster HM, MK 2 - Years 2017-2024
Part:

In this video, we see how the appearance of an orange light, shaped like a tyre with an exclamation mark, on the Dacia Duster's dashboard alerts us that one of the tyres has registered a drop in pressure. Check the tyre pressures as soon as possible with appropriate equipment, and if necessary, restore the correct values, referring to the table found on the driver's door frame. Once the operation is complete, proceed to reset the system: turn on the ignition, use the arrow buttons on the right side of the steering wheel to select the Tyre Pressure menu on the central display, and hold the up arrow until the confirmation message for the reset appears.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the tire pressure warning light on the Dacia Duster.
Resetting the tire pressure warning light on the Dacia Duster.
Dacia Duster (2017-2024 / HM, MK 2) Today's guide will show us how to reset the tire pressure warning light on the Dacia Duster; before resetting the TPMS sensors, it is necessary for a…
How to reset the tire pressure sensor of the Dacia Duster
How to reset the tire pressure sensor of the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) In a few simple steps, we will see how to reset the tire pressure warning light (TPMS) of the Dacia Duster; before performing the reset, it is necess…
How to reset the tire pressure warning light on the Dacia Duster
How to reset the tire pressure warning light on the Dacia Duster
Dacia Duster (2024-2026 / P1310) Today's instructions will allow us to reset the tire pressure warning light of the Dacia Duster; before performing the reset of the TPMS sensors, it …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos