Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on a Dacia Sandero B8

Model: Dacia Sandero B8 - Years 2012-2020
Part: Cabin air filter

In this video, see how to prevent dirt and foreign bodies from entering the ventilation circuit of the Dacia Sandero. A dedicated filter is mounted on the intake, which must be replaced every fifteen thousand miles, sooner if driving on particularly dusty roads. For the replacement, position yourself in the front passenger seat, at the end of the central tunnel, near the heat shield, where you will find the filter cover mounted vertically. Open it by acting on the fixing clips, remove the old filter, and replace it with a new filtering element, paying attention to the direction of airflow. Close the cover.

Updated on 22 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacement of the cabin filter on a Dacia Sandero
Replacement of the cabin filter on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) In this very useful tutorial, we can see how to replace the cabin air filter on a Dacia Sandero, second generation model produced from 2012 to 2020. …
How to replace the air filter of the Dacia Sandero
How to replace the air filter of the Dacia Sandero
Dacia Sandero (2012-2020 / B8) When the engine of your Dacia Sandero overheats abnormally even at low speeds, it is very likely that it is time to replace the appropriate air filte…
How to Replace the Cabin Air Filter in a Dacia Sandero
Dacia Sandero (2008-2012 / BS) The cabin air filter in the Dacia Sandero is located inside the passenger compartment, under the glove box on the left. To replace it, unscrew the sc…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos