Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of a Dacia Sandero

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight bulb

See other generations:
Video tutorial

In this brief and simple guide, you will find the instructions to remove and replace the headlight bulb of a Dacia Sandero. First, open the bonnet and begin to remove the plastic protective cover of the bulbs; then disconnect the electrical connector and unclip the metal spring to remove the bulb from the headlight unit, as shown in the video.

At this point, install the new dipped or main beam bulb (in this case with an H7 fitting); reconnect the electrical connector and refit the plastic cover!


Updated on 24 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of the Dacia Sandero?
How to Replace the Front Headlight Bulb of the Dacia Sandero?
Dacia Sandero (2008-2012 / BS) To replace the front headlight bulb of the Dacia Sandero, open the bonnet to access the engine compartment. Next, remove the cover cap from the insid…
Removing Front Headlight Bulb Dacia Sandero
Removing Front Headlight Bulb Dacia Sandero
Dacia Sandero (2008-2012 / BS) In today's video, you will see how to remove and replace the front headlight bulb of a Dacia Sandero. First, open the bonnet of your car and remove t…
How to Replace the Front Headlamp Bulb on a Dacia Sandero
How to Replace the Front Headlamp Bulb on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) To replace the front headlamp bulb on your Dacia Sandero, open the bonnet to access the components at the rear of the corresponding headlamp. Once th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos