Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump in the Datsun Go?

Model: Datsun Go MK 1 - Years 2013-2022
Part: Fuel pump

In this tutorial, see how to remove the fuel pump in the Datsun Go, a very simple operation. First, ensure the key is not in the ignition for safety. Then, lift the rear seat and remove the central cap using a flathead screwdriver. Next, disconnect the power connector, also disconnect the two fuel hoses, and unscrew the mounting screws around the entire perimeter. Once done, grasp the pump, pull it out of the tank, and install the replacement by following the reverse procedure.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fuel Pump from the Datsun Go
Datsun Go (2013-2022 / MK 1) In this guide, discover how to remove and replace the fuel pump from the Datsun Go by following the instructions below. First, open the rear doors an…
How to Replace the Fuel Filter on a Datsun Go?
How to Replace the Fuel Filter on a Datsun Go?
Datsun Go (2013-2022 / MK 1) To replace the fuel filter on a Datsun Go, access the underside of the vehicle near the fuel tank. Here, you will locate the fuel filter, which needs…
How to Remove the Dashboard of the Datsun Redi Go
How to Remove the Dashboard of the Datsun Redi Go
Datsun Go (2013-2022 / MK 1) In today's video, you will see how to completely remove the dashboard of the Datsun Redi Go. First, remove the center steering wheel cushion. Then, l…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos