Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Datsun
    3. :
  3. Go
    4. : How to disassemble the Datsun Go fuel pump

Datsun Go - Video tutorial

Model: Datsun Go MK 1 - Years 2013-2022
Part: Fuel pump
Operation: How to disassemble the Datsun Go fuel pump

Let's find out in this guide how to disassemble and replace the Datsun Go fuel pump, following the instructions below. First of all we open the rear doors and start removing the sofa, lifting it to release it; then we remove the pump cover, then disconnecting the fuel pipes and the fuel level sensor electrical connector, as shown in the video. At this point we unscrew the screws of the fuel pump, in order to remove it and replace it with the new one; then we put everything back together, applying the reverse procedure!


Posted on 18 November 2022 by ScegliAuto

This video is currently unavailable

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos