Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Derbi Senda 50cc
Part: Wheel

To replace the wheels of the Derbi Senda 50, you need to loosen the nuts that secure them to their mounts, corresponding to the fork and the rear swingarm. Once the nuts holding the central pins of the wheels have been loosened, you will need to proceed by loosening the screws that secure the brake calipers to their respective discs; this way, you will be able to completely detach the old wheels in order to insert the new ones. After they have been secured with the nuts, you can reinstall the calipers, making sure that everything is functioning properly.

Posted on 28 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plug on a Derbi Senda 50
How to Replace the Spark Plug on a Derbi Senda 50
Senda 50cc This operation must be performed with the engine cold. Before starting, position your Derbi Senda 50 on the side stand. Begin by disconnecting the ca…
How to Start a Derbi Senda
How to Start a Derbi Senda
Senda 50cc Before you begin, sit on the seat of your Derbi Senda. Start by inserting the key into the ignition switch and turning it fully clockwise. Next, pull…
How to Remove the Seat from a Derbi Senda 50
How to Remove the Seat from a Derbi Senda 50
Senda 50cc Before you can begin, position your Derbi Senda 50 on the side stand. Start by unscrewing and removing the bolts that secure the seat to the frame, l…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos