Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Remove the fairings and the fuel tank for optimal working conditions. Drain the coolant by opening the drain plug. Give the pedal a few taps to push out any remaining fluid. Unscrew the brake pedal pin, then drain the engine oil from its outlet hole. Remove the small cover from the mixer. Disconnect all services and the throttle cable. Remove the crankcase cover by unscrewing the screws. Remove the pedal and then the cover. Here is the clutch! Remove the clutch disc assembly by unscrewing the 5 screws with springs, then the plate and finally the discs themselves.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the Derbi D50B engine?
How do you disassemble the Derbi D50B engine?
(Various brands) Various In order to disassemble the engine of the Derbi D50B, you need to loosen the screws that fix the engine block to its housing in the center of the fra…
How to Replace the Transmission on a Derbi Variant?
How to Replace the Transmission on a Derbi Variant?
(Various brands) Various To replace the transmission on a Derbi Variant, first remove the pedal located near the protective cover on the right side of the bike. Loosen the pe…
How to Replace the Motorcycle Clutch Cable
How to Replace the Motorcycle Clutch Cable
(Various brands) Various This video will show you how to replace the motorcycle clutch cable. Although this operation is not complex, it is essential to replace the motorcycl…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos