|
Do it yourself
| |||
| ||||
|
Model: Derbi Senda 125
To replace the chain on a Derbi Senda 125, break the old chain using a chain cutter. This will allow you to unscrew the bolts securing the cover around the sprocket, enabling you to remove it by sliding off the old chain. Next, loosen the nut that secures the rear wheel axle and remove the wheel, replacing the sprocket with a new one. At this point, begin to insert the chain around the sprocket and the pinion, refitting the rear wheel using the axle previously removed.
Updated on 6 June 2026 by ScegliAuto
This video is currently unavailable
Related tutorials
Senda 125
To replace the chain on the Derbi Senda 125, first break the old chain using a chain cutter. This allows you to unscrew the screws securing the cover…
Senda 125
To replace the chain on the Derbi Senda 125, first break the old chain using a chain cutter. This will allow you to loosen the bolts securing the cov…
Senda 125
In order to replace the sprocket of the Derbi Senda, you need to loosen all the screws that secure the protective panel on the left side: under it yo…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.162
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
