Do it yourself
Frequently asked questions about cars and motorcycles

Model: Derbi Senda 125
Part:

To replace the chain on the Derbi Senda 125, first break the old chain using a chain cutter. This allows you to unscrew the screws securing the cover around the sprocket, enabling you to remove it by sliding off the old chain. Next, unscrew the nut that secures the rear wheel axle and remove the wheel, replacing the sprocket with a suitable one. Now, begin to insert the chain around the sprocket and the drive sprocket, refitting the rear wheel with its axle and also connecting the chain with the appropriate link.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Senda 125 To replace the chain on the Derbi Senda 125, first break the old chain using a chain cutter. This will allow you to loosen the bolts securing the cov…
Senda 125 To replace the chain on a Derbi Senda 125, break the old chain using a chain cutter. This will allow you to unscrew the bolts securing the cover arou…
Senda 125 In order to replace the sprocket of the Derbi Senda, you need to loosen all the screws that secure the protective panel on the left side: under it yo…

Replacing the Rear Light on a Harley Davidson Street Glide

In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, place your bike on a stand and move to the rear; then use a socket and spanner to unscrew and remove the nuts found inside the wheel arch, at the height of the rear light, as shown in the video. At this point, disconnect the electrical connector to remove and replace the light with the new one; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos