Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust on a Derbi Senda, you need to widen the fixing ring that connects the engine block to the remaining part of the exhaust pipe: once this ring has been removed, proceed to unscrew the bolt that secures the exhaust to its support near the rear mudguard. At this point, the old exhaust can be completely removed, and you can insert the new replacement part: this must be connected to the engine with the appropriate ring and secured to the mudguard with the corresponding rear support.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Senda 50cc You can remove the exhaust from the Derbi Senda 50 by loosening the clamp that connects the manifold to the remaining part of the exhaust pipe. Once …
Senda 50cc To remove the exhaust of the Derbi Senda 50, it is necessary to widen the fixing ring that connects the exhaust terminal to the corresponding collect…
Senda 50cc On the Derbi Senda 50 it will be possible to remove the exhaust from its housing by widening the connecting ring that joins the collector to the rema…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos