Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Lifting Kit on a Derbi Senda 125

Model: Derbi Senda 125
Part: Checks and maintenance

Video tutorial

To install the lifting kit on the Derbi Senda 125, loosen the screws securing the exhaust at the front and then at the bottom. Once the screws are loosened, you can completely remove the exhaust and loosen the bolts securing the rear shock absorber pin. After removing the pin, insert the lifting kit into its place so that the shock absorber pin goes into the kit and not into its previous housing; this will make the bike taller.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a Derbi Senda 125?
How to Replace the Exhaust on a Derbi Senda 125?
Senda 125 To replace the exhaust on a Derbi Senda 125, loosen the bolts that secure the exhaust at the lower central part of the bike and at the rear. Once all…
How to Replace the Exhaust on a Derbi Senda 125?
How to Replace the Exhaust on a Derbi Senda 125?
Senda 125 You can replace the exhaust fitted on the Derbi Senda 125 by loosening the screws that secure the cover panel located on the right side of the bike, …
How to Prepare the Fuel Mixture for the Derbi Senda 125
How to Prepare the Fuel Mixture for the Derbi Senda 125
Senda 125 This guide explains how to prepare the fuel mixture for the Derbi Senda 125 enduro bike. First, place your bike on the stand and open the fuel tank c…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Engine Light on a Yamaha Ray RZ?

To reset the engine light on a Yamaha Ray RZ, connect a diagnostic tool to the vehicle's OBD port. The OBD port is located just above the battery housing, accessible by removing the panel in the centre of the footwell. Once this panel is removed, connect the scanner and select the car model and its corresponding version. After connecting the scanner and following the tutorial steps, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos