Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Derbi
    3. :
  3. Senda 125
    4. : How to mix on the Derbi Senda 125

Model: Derbi Senda 125
Part: Checks and maintenance
How to mix on the Derbi Senda 125

Let's see in this guide how to mix the fuel of the Derbi Senda 125 enduro motorcycle. First of all we put our bike on the stand and start opening the fuel tank cap; then we go to prepare our blend, using the 2% formula (as well as twenty milligrams of oil for every liter of gasoline). Let's go then to prepare our mixture on a container or directly to the fuel dispenser; let's make sure that it is well mixed with the 2-stroke engine oil, suitable for our engine, following the video to the end!


Posted on 23 August 2022 by ScegliAuto



How do you replace the exhaust pipe of the Derbi Senda 125?
Senda 125 The procedure for replacing the exhaust on the Derbi Senda 125 involves loosening the screws that secure the exhaust in the lower central part of the
How to replace the engine oil of the Derbi Senda 125?
Senda 125 The DIY process for replacing the engine oil on the Derbi Senda 125 is really very simple; let's see how to quickly perform the service. First, put o
How do you replace the piston of the Derbi Senda 125?
Senda 125 In order to replace the piston of the Derbi Senda 125, it is necessary to completely remove the seat and remove all parts that are located above the

How to change the Harley Davidson Street Glide engine oil and relative filter

The guide shows you how to change the Harley Davidson Street Glide engine oil. The first thing to do is to make the motorcycle safe and unscrew the oil tank cap. At this point, from the bottom of the bike, unscrew the drain plug of the oil pan with a 15mm wrench; allow the oil to flow into a suitable container for disposal. From the left side of the bike, start unscrewing the oil filter and place a plastic bag to collect the oil that comes out. Remove the old filter and clean the housing. Lubricate the gasket on the new filter and install a new O-ring on the drain plug and fit the elements in place. Top up the oil to the correct amount and run the engine. Check the oil level again.

Watch the video!


by ScegliAuto

More videos