Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Handbrake of the DFKS 580 Glory

Model: DFSK 500 MK 1 - Years: 2022, 2023, 2024, 2025, 2026
Part: Parking brake

Video tutorial

In this video, see how to adjust the handbrake of the DFKS 580 Glory: get inside and pull it to its maximum; you will need to remove the rear panel of the air conditioning, which comes off easily as it is all pressure-fitted. You may use a plastic spatula to help and then disconnect the electrical connectors.

At this point, you will see the handbrake cable. Use a 10 mm spanner to adjust it. Tighten it so that the handbrake lever does not require more than three or four clicks to be fully engaged.

Once this check is done, proceed to reassemble the air conditioning panel at the rear, and the job is complete.


Updated on 18 September 2026 by ScegliAuto


Related tutorials

How to Install the Android Application on DFKS Glory 580
How to Install the Android Application on DFKS Glory 580
DFSK 500 (2022-2026 / MK 1) In this video, we will see how to install the Android app on a DFKS. This is a Chinese manufacturer specialising in the production of light trucks, w…
How to configure the radio of the DFSK 500
How to configure the radio of the DFSK 500
DFSK 500 (2022-2026 / MK 1) Configuring the radio of the DFSK 500 is a very simple operation that can be done independently, thanks to our video tutorial that will explain how t…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos