Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil on a 2009 Dodge Avenger

Model: Dodge Avenger MK 1 - Years 2008-2013
Part: Service warning light

After replacing the motor oil in the 2011 Dodge Avenger's tank, it is necessary to proceed with resetting the oil light. To reset the light, we must press the accelerator pedal three times at 10-second intervals, while keeping the brake pedal pressed. Once the oil light has turned off, turn off the instrument panel and then turn it back on to complete the reset of the light. This operation can be performed on other Dodge Avenger vehicles, but if the light is not reset, it is necessary to reset it using a computer for diagnostic and OBD connection.

Posted on 23 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil on a 2012 Dodge Avenger
How to reset the oil on a 2012 Dodge Avenger
Dodge Avenger (2008-2013 / MK 1) The following video tutorial will explain how to reset the oil light on a Dodge vehicle. To reset the oil light on a 2012 Dodge Avenger, we need to p…
How to reset the oil light on the Dodge Avenger
How to reset the oil light on the Dodge Avenger
Dodge Avenger (2008-2013 / MK 1) In the following guide dedicated to all of you who own a Dodge Challenger, we will discover how to correctly perform a manual reset of the oil light …
How to replace the battery in the Dodge Avenger key.
How to replace the battery in the Dodge Avenger key.
Dodge Avenger (2008-2013 / MK 1) It is not always necessary to buy a new key for your Dodge Avenger when the one you have suddenly stops working. In fact, many times the problem is c…

How to Replace the Front Headlamp on a Fiat Bravo

First, release the bonnet using the lever, then lift it. To remove the headlamp, you will need to dismantle a significant part of the front bumper. Start by removing the inner wheel arch liner to access the screw that secures the bumper to the wing. Next, remove the screws located on the top of the bumper. This will allow you to unscrew all the bolts securing the headlamp, including the one hidden by the bumper. Finally, disconnect the connector at the back of the headlamp and carry out the necessary replacements.

Watch the video!


by ScegliAuto

More videos