Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the windshield wiper blades of the Dodge Durango

Model: Dodge Durango WK2, MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Windshield wipers

See other generations:
Video tutorial

Let's see how to replace the windshield wiper blades on the Dodge Durango. Keep in mind, when purchasing new blades, that the driver's side blade measures 22 inches, while the passenger side blade measures 21 inches.

We must also be very careful during installation, as using the wrong size will cause the blade to hit the windshield pillar. Lift the wiper arm; turn it off after a wipe cycle: they will stop in the service position, with the arms vertical.

Rotate the blade 90° relative to the arm, find the release button on the hook tab and slide it downward. Install the new blade paying attention to the installation direction: the rounded side is the one that fits into the "U" shaped hook.

Repeat on the other side.


Posted on 3 November 2025 by ScegliAuto


Related tutorials

Where is the Fuse Box on a 1999 Dodge Durango?
Where is the Fuse Box on a 1999 Dodge Durango?
Dodge Durango (1998-2003 / MK 1, DN) In this guide for all you owners of a first-generation Dodge Durango (1999), we will discover where the fuse box containing all the various fuses for…
Where to Find the Cabin Fuse Box of the 2003 Dodge Durango
Dodge Durango (1998-2003 / MK 1, DN) To find the cabin fuse box of your 2003 Dodge Durango, you must first carefully read the following guide and then apply all the various steps describ…
How to Replace the Front Headlight Bulb of the Dodge Durango
How to Replace the Front Headlight Bulb of the Dodge Durango
Dodge Durango (2011-2024 / WK2, MK 3) Today's instructions will guide you through removing and replacing the front headlight bulb of the Dodge Durango. First, open the bonnet of the vehic…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos