Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Dodge Charger LX - Years 2006-2011
Part: Cabin air filter

The cabin air filter is located under the front windscreen on the passenger side, just below the wiper blade; therefore, open the front bonnet to facilitate the replacement operation, remove the protective grille by simultaneously opening the two fastening tabs, and extract the old filter. Ensure there are no dirt residues inside the filter housing and remove them if present. Then insert the new filter, respecting the direction of the airflow, and reposition the grille. It is also recommended to sanitise the cabin with a suitable antibacterial spray.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Engine Air Filter
Replacing the Engine Air Filter
Dodge Charger (2006-2011 / LX) Replacing the engine air filter is a simple task that allows you to save money on mechanic fees if you do it yourself. This filter ensures that clean…
Replacing the Engine Air Filter
Replacing the Engine Air Filter
Dodge Charger (2011-2023 / LD) The engine air filter housing (or AIRBOX) is located on the side, near the coolant reservoir. Unscrew the fixing screws of the cover, lift it, and ex…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Dodge Charger (2011-2023 / LD) Lift the vehicle on a hydraulic ramp, remove the plastic protective cover, and unscrew the drain plug located on the side of the oil sump; once drain…

Other guides you may be interested in

How to Remove the Original Radio on a Honda CR-V

How do you remove the original radio on a Honda CR-V? First, use a plastic lever to remove the side cover of the radio (the air vents), then, with a screwdriver, unscrew the securing screws located on the sides (if present). After unscrewing the side screws (and disconnecting the clips) of the stereo, pull it out from its slot and remove it (disconnect the various power connectors at the back). To install the new stereo and the various removed parts, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos