Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Dodge Charger LD - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Engine oil

See other generations:
Video tutorial

Lift the vehicle on a hydraulic ramp, remove the plastic protective cover, and unscrew the drain plug located on the side of the oil sump; once drained, refit the plug, tightening it properly; reposition the plastic cover. To replace the filter, access the engine bay, remove the upper cover, and unscrew the plastic cap beneath which the filter cartridge is located.

Then, pull out the old cartridge and insert the new one, also replacing the o-ring seal on the cap. Screw in the new filter and fill the engine with new oil according to the quantities and SAE specifications listed in the user and maintenance manual.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Replacing the Engine Cylinder Head Gasket
Replacing the Engine Cylinder Head Gasket
Dodge Charger (2006-2011 / LX) Overheating is the main cause of damage to the engine cylinder head gasket. The following guide provides useful instructions on how to replace it. Fi…
Replacing the Engine Air Filter
Replacing the Engine Air Filter
Dodge Charger (2006-2011 / LX) Replacing the engine air filter is a simple task that allows you to save money on mechanic fees if you do it yourself. This filter ensures that clean…
Replacing the Coolant Reservoir
Replacing the Coolant Reservoir
Dodge Charger (2006-2011 / LX) To replace the coolant reservoir, first drain the system by disconnecting the drainage hose located at the bottom of the radiator (blowing a bit of a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos