Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service in the Dodge Journey?

Model: Dodge Dodge Various
Part: Service warning light

In this tutorial we can see how to reset the service light in the Dodge Journey. Obviously, this simple and quick operation must be carried out only after having carried out all the maintenance work required. To proceed with the reset, first insert the key and turn on the instrument panel. Subsequently, a few fractions of a second after the initialization of the same, we press the accelerator pedal to the bottom 3 consecutive times. Once this is done, we turn off the ignition, turn it on again and verify that the maintenance light has been reset correctly.

Posted on 8 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Dodge Journey on-board computer?
How do you reset the Dodge Journey on-board computer?
Dodge Dodge Various In order to reset the Dodge Journey's on-board computer, you need to insert the key into its lock and it will be necessary to rotate it back and fort…
Reset the Dodge Journey light
Reset the Dodge Journey light
Dodge Dodge Various How to reset the warning light that appears in the instrument panel display? Let's see how to reset the warning light that appears on the Dodge Journ…
How do I replace the exterior mirror on the Dodge Journey?
How do I replace the exterior mirror on the Dodge Journey?
Dodge Dodge Various In order to replace the exterior mirror of the Dodge Journey, you need to remove the triangular plastic cover located on the inside of the door. By r…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos