Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Dodge
  4. :
  5. Charger
  6. : How to disassemble the injectors in a Dodge Charger?

Dodge Charger - Video tutorial

Model: Dodge Charger LD - Years 2011-2023
Part: Injectors
Operation: How to disassemble the injectors in a Dodge Charger?

In this tutorial, we can see how to disassemble the injectors in the Dodge Charger, a very simple operation. First of all, we wait for the engine to cool down sufficiently, then we open the rear door, open the fuse box and remove fuse 21. We then open the engine hood, remove both the intake manifold and the air filter box, and disconnect the power connector indicated. At this point, all that remains is to unscrew the two bolts, disconnect the cross tube, and gently unscrew the injectors to be replaced. To reassemble everything, just follow the reverse procedure.


Posted on 26 May 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos