Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the boot lid when it is stuck on a Dodge Challenger?

Model: Dodge Challenger MK 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

Video tutorial

On the Dodge Challenger, the boot lid may become stuck due to issues with the battery or the lock actuator. In such cases, you can still perform an emergency opening by following the simple procedure shown in this tutorial.

First, open the driver's door, then lower the back seat and go into the boot. Next, locate the indicated white lever, grasp it, and pull it towards you to unlock the latch.

The boot lid will now be free to open.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

How to Remove the Airbag from a Dodge Challenger?
How to Remove the Airbag from a Dodge Challenger?
Dodge Challenger (2008-2023 / MK 3) Good morning, today you will remove the airbag from a Dodge Challenger. Start by sitting in the driver's seat of the car. Next, locate the airbag cov…
How to Replace the Rear Light on a Dodge Challenger
How to Replace the Rear Light on a Dodge Challenger
Dodge Challenger (2008-2023 / MK 3) In this tutorial video, you will see how to replace the rear light on a Dodge Challenger by following some simple steps: the first thing to do is ope…
How to Replace the Key Battery on a Dodge Challenger
How to Replace the Key Battery on a Dodge Challenger
Dodge Challenger (2008-2023 / MK 3) If your Dodge Challenger key has suddenly stopped working, you will need to replace the battery inside it. Below are all the necessary instructions. …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos