Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the Dr5 radio and grease the heat knobs.

Model: DR 5 MK 1 - Years 2007-2022
Part: Car stereo

In this video you can see how it is possible to mount a 2 DIN Android car radio plus greasing of the heating knobs on a Dr5 car, following a few simple steps. First you must disconnect the battery cables to avoid electrical damage; get on board your car and unhook the central dashboard as shown in the video and unhook the three cables connected to the dashboard. Now take a key and unscrew the screws of the brackets that hold the car radio. Replace the car radio with the new one; follow the wire diagram in the manual and place them in the plug. The USB cable can be placed in the glove compartment. With a spanner unscrew the screws to remove the knobs of the heating to give it a lubricated. Grease the parts and reassemble all the components working backwards.

Posted on 24 October 2022 by ScegliAuto

Video tutorial

Related tutorials

DR 5 (2007-2022 / MK 1) To set the clock on the DR5, you need to work directly from the instrument panel using the partial odometer button. With the car stationary and the e…

Other guides you may be interested in

How to Remove the Distributor from a Fiat Panda

How to remove the distributor from a Fiat Panda? Lift the bonnet and secure it, then use a screwdriver to unscrew the locking pins of the ventilation pipe, remove the engine soundproofing panel and the cap (detach it). Start by unscrewing the fastening pins of the distributor (as shown in the video); remove the distributor from the engine housing. Install a new distributor inside the engine bay, connect the various cables and close with the cap. Refit all previously removed parts (soundproofing panel, filter, etc.) and test the correct operation.

Watch the video!


by ScegliAuto

More videos