Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ducati
    3. :
  3. Monster 600
    4. : Replacement pads on Ducati motorcycles

Model: Ducati Monster 600
Part: Brake pads
Replacement pads on Ducati motorcycles

With a 5mm Allen key remove the main brake pin (it will be a bit stiff). Then with the 12-inch ratchet wrench remove the other two neighboring nuts. Now you can remove the brake block by pulling hard with your hands. 631 RS pads are recommended. Now it is child's play to remove the old pads and insert the new one by scratching them a little between them before fitting. If the disc does not pass between the enlarged pads, the block with a flat head screwdriver and reinsert the brake block, so that the disc is in the middle of the two new pads. Tighten to 25 Nm as per video.


Posted on 26 December 2023 by ScegliAuto

How do you replace the clutch cable of the LML Star?

In order to replace the clutch cable of the LML Star you have to unscrew the screws that fix the front fairing of the bike, so that it can be removed: here it will be possible to find one of the ends of the cable, which will be connected to the relative lever. By unscrewing the bolt that connects the lever to the cable, it will be possible to detach the first end; the other end will be directly connected to the clutch. Once both ends have been disconnected, the cable can be pulled out and replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos