Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Freemont
    4. : Clock

Fiat Freemont - Clock

Clock Fiat Freemont (2011-2016 / mk 1)

Fiat Freemont (2011-2016 / MK 1)
How to set the clock on the Fiat Freemont.
We will briefly see the instructions that will allow us to adjust the clock on the instrument panel display of the Fiat Freemont. First, let's get inside the …Read all…
Posted on 29 December 2025 by ScegliAuto
Fiat Freemont (2011-2016 / MK 1)
How to Change the Time on a Fiat Freemont
In this short video guide, learn how to change the time on the onboard computer of a Fiat Freemont, produced from 2011 to 2016. Start the vehicle and press the …Read all…
Posted on 6 September 2026 by ScegliAuto
Fiat Freemont (2011-2016 / MK 1)
How to Change the Time in a Fiat Freemont
To change the time in a Fiat Freemont, start by turning on the instrument cluster by pressing the engine start button. Operate from the central infotainment …Read all…
Posted on 9 July 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Car stereo (7) Battery (7) Air vents (1) Transmission (2) Spark plugs (1) Key (11) Trunk lock (1) Timing belt (1) Air conditioner (1) A/C controls (1) Onboard computer (4) Checks and maintenance (3) Dashboard (1) MAF sensor (1) Brake rotors (1) Tail light (2) Fog lights (2) Air filter (1) Cabin air filter (3) Diesel fuel filter (2) Grille (1) Headlight bulb (5) Instrument panel light (2) Engine (1) Transmission fluid (1) Engine oil (1) Clock (3) Door trim panel (1) Rear bumper (1) Brake pads (3) Shift knob (1) Pump (1) Car door (1) Push button (1) Fuse box (5) Seat (4) Door lock (1) Side mirror (1) Warning light – error code (5) (2) Tire pressure warning light (2) Service warning light (12)

How to reset the tyre pressure warning light on the Citroën DS4?

The tyre pressure warning light on the Citroën DS4 can be reset by inflating the tyres until they reach the corresponding pressure value, which is indicated on the sticker attached to the driver's door pillar. Once all tyres are at this value, turn on the ignition by inserting the key into the ignition switch; this should make the warning light disappear from the dashboard. If it does not reset, start the engine and drive to allow the sensors to read the new values.

Watch the video!


by ScegliAuto

More videos