Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Freemont
    4. : Cabin air filter

Fiat Freemont - Cabin air filter

Fiat Freemont (2011-2016 / MK 1)
How to replace the cabin filter in a Fiat Freemont
In this video tutorial we can see how it is possible to replace the cabin filter in a Fiat Freemont, following a few simple steps: the first thing to do is to …read all…
Posted on 13 October 2022 by ScegliAuto
Fiat Freemont (2011-2016 / MK 1)
How to replace the pollen filter on the Fiat Freemont
Replacing the cabin pollen filter when necessary is very important as it helps to maintain an optimal level of air quality inside the car itself, especially …read all…
Posted on 27 April 2024 by ScegliAuto
Fiat Freemont (2011-2016 / MK 1)
Cabin air filter replacement
To be able to replace the passenger compartment air filter, we open the glove compartment. At this point we will find ourselves in front of the two side walls …read all…
Posted on 20 July 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (1) Car stereo (6) Battery (9) Air Vents (1) Gearbox (2) Spark plugs (1) Key (8) Locking the trunk (1) Timing belt (1) Air conditioning controls (1) -board computer (7) Checks and maintenance (7) Dashboard (1) Mass air flow sensor (1) Brake discs (1) Tail light (1) Fog lights (2) Air filter (1) Cabin air filter (3) Diesel filter (2) Grille (1) Headlight bulb (5) Dashboard light (2) Engine (1) Gear oil (1) Engine oil (1) Door panel (1) Rear bumper (1) Brake pads (3) Gear Shift Knob (1) Pump (1) Door (1) Push button (1) Instrument cluster (2) Fuse box (4) Seat (4) Lock (1) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos