Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Freemont
    4. : Mass air flow sensor

Fiat Freemont - Mass air flow sensor

Fiat Freemont (2011-2016 / MK 1)
How to remove the mass air flow sensor (air sensor) on Fiat Freemont 2.0 Jtdm
Let's see in this video how to remove the "map" sensor or the mass air flow sensor on a Fiat Freemont 2.0 Jtdm, following these simple steps. First we open the …read all…
Posted on 8 February 2024 by ScegliAuto
Cigarette Lighter (1) Airbags (1) Car stereo (6) Battery (9) Air Vents (1) Gearbox (2) Spark plugs (1) Key (8) Locking the trunk (1) Timing belt (1) Air conditioning controls (1) -board computer (7) Checks and maintenance (7) Dashboard (1) Mass air flow sensor (1) Brake discs (1) Tail light (1) Fog lights (2) Air filter (1) Cabin air filter (3) Diesel filter (2) Grille (1) Headlight bulb (5) Dashboard light (2) Engine (1) Gear oil (1) Engine oil (1) Door panel (1) Rear bumper (1) Brake pads (3) Gear Shift Knob (1) Pump (1) Door (1) Push button (1) Instrument cluster (2) Fuse box (4) Seat (4) Lock (1) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos