Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Mass Air Flow Sensor on a Fiat Freemont 2.0 JTDm

Model: Fiat Freemont MK 1 - Years 2011-2016
Part: MAF sensor

This guide shows how to remove the "map" sensor or mass air flow sensor on a Fiat Freemont 2.0 JTDm by following these simple steps. First, open the bonnet of your car and remove the upper plastic cover of the engine; then disconnect the electrical connector of the mass air flow sensor by lifting the yellow lever, as shown in the video. Once the connector is removed, unscrew the fastening screw of the sensor, then unclip the tab; now you can remove it for cleaning or direct replacement. Apply the reverse procedure for reassembly!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Fiat Freemont
How to Reset the Tyre Pressure Warning Light on a Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) This short video will show you how to resolve the issue of the TPMS warning light coming on in your Fiat Freemont. We will explain how to reset the t…
How to reset the TPMS warning on the Fiat Freemont
How to reset the TPMS warning on the Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) In this guide we will see the instructions to follow to reset the tire pressure warning of the Fiat Freemont, but also of the Dodge Journey. First of…
How to program TPMS sensors and reset the warning on the Fiat Freemont
How to program TPMS sensors and reset the warning on the Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) Today's main instructions will show us how to program tire pressure sensors and reset the TPMS light on the Fiat Freemont. To perform this operation,…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos