Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Seicento
    4. : Shocks

Fiat Seicento - Shocks

Shocks Fiat Seicento (1998-2010 / mk 1)

Fiat Seicento (1998-2010 / MK 1)
How to Replace the Rear Shock Absorbers on a Fiat Seicento?
To replace the rear shock absorbers on a Fiat Seicento, lift the car with a jack so that the rear wheels do not touch the ground. At this point, access the …Read all…
Posted on 13 August 2026 by ScegliAuto
Fiat Seicento (1998-2010 / MK 1)
How to Change the Rear Shock Absorber on a Fiat 600
Removing the rear shock absorber from a Fiat 600? Let’s see how to disassemble the part. Lift the car on a column ramp and identify the shock absorber to be …Read all…
Posted on 16 April 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Shocks (2) Battery (3) Ignition coil (1) Air vents (1) Transmission (1) Spark plugs (4) Timing belt (6) V-belt (2) Air conditioner (1) Checks and maintenance (9) Dashboard (1) MAF sensor (1) Brake rotors (2) Headlight (4) Tail light (1) Fog lights (1) Air filter (2) Clutch (2) Light bulb (1) Interior dome light bulb (1) Antifreeze coolant (2) Instrument panel light (2) License plate light (1) Engine (1) Power window motor (1) Engine oil (2) Clock (1) Door trim panel (2) Front bumper (1) Rear bumper (4) Brake pads (1) Shift knob (2) Fuel pump (4) Car door (1) Power window switch (1) Instrument cluster (2) Radiator (1) Heater core (1) Wheel (2) Fuse box (3) Seat (2) Crankshaft position sensor (1) Side mirror (2) Engine mount (1) Brake drums and shoes (3) Windshield wipers (1) Cylinder head (1) Steering wheel (6)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos