Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Seicento
    4. : Battery

Fiat Seicento - Battery

Fiat Seicento (1998-2010 / MK 1)
How to change the battery in a Fiat Seicento
To change the battery of the Fiat seicento you need a 10mm ratchet wrench. We disconnect the negative pole first and then the positive one and the 12 pin on …read all…
Posted on 27 November 2022 by ScegliAuto
Fiat Seicento (1998-2010 / MK 1)
How to replace the battery of a Fiat 600
How to replace the battery of a Fiat 600? This video explains how to replace the battery. We open the car door and pull up the engine compartment opening lever …read all…
Posted on 21 November 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (1) Shock absorbers (2) Battery (2) Coil (1) Air Vents (1) Spark plugs (4) Timing belt (4) V-belt (2) Air conditioning (1) Checks and maintenance (10) Dashboard (1) Mass air flow sensor (1) Brake discs (2) Headlight (4) Tail light (1) Fog lights (1) Air filter (2) Clutch (1) Light bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Dashboard light (2) License plate light (1) Engine (1) Window motor (1) Engine oil (2) Door panel (2) Rear bumper (4) Brake pads (1) Gear Shift Knob (2) Fuel pump (4) Door (1) Window lift button (1) Instrument cluster (2) Radiator (1) Passenger compartment heating radiator (1) Wheel (2) Fuse box (3) Seat (2) Crankshaft RPM sensor (1) Outside rearview mirror (2) Engine mount (1) Drums and shoes (2) Engine head (1) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos