Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Seicento
    4. : Fuel pump

Fiat Seicento - Fuel pump

Fuel Pump Fiat Seicento (1998-2010 / mk 1)

Fiat Seicento (1998-2010 / MK 1)
How to Replace the Fuel Pump in the Fiat Seicento
Today, we will see in this video tutorial the main steps that will allow us to remove and replace the fuel pump in the Fiat Seicento. First, access the rear of …Read all…
Posted on 22 July 2026 by ScegliAuto
Fiat Seicento (1998-2010 / MK 1)
Instructions for Removing the Fuel Pump on a Fiat 600
This video shows the main instructions for removing the fuel pump on a Fiat 600. First, access the rear of the car and remove the rear seat by lifting it …Read all…
Posted on 21 June 2026 by ScegliAuto
Fiat Seicento (1998-2010 / MK 1)
How to Remove the Fuel Pump on a Fiat Seicento
How do you remove the fuel pump on a Fiat Seicento? First, lift the bonnet and secure it with the prop rod, then remove the engine soundproofing panel and …Read all…
Posted on 26 March 2026 by ScegliAuto
Fiat Seicento (1998-2010 / MK 1)
How to Replace the Fuel Pump on a Fiat Seicento
The low-pressure fuel pump functions to transfer fuel from the tank to the engine, especially during the ignition phase: when the ignition is turned on, an …Read all…
Posted on 6 March 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Shocks (2) Battery (3) Ignition coil (1) Air vents (1) Transmission (1) Spark plugs (4) Timing belt (6) V-belt (2) Air conditioner (1) Checks and maintenance (9) Dashboard (1) MAF sensor (1) Brake rotors (2) Headlight (4) Tail light (1) Fog lights (1) Air filter (2) Clutch (2) Light bulb (1) Interior dome light bulb (1) Antifreeze coolant (2) Instrument panel light (2) License plate light (1) Engine (1) Power window motor (1) Engine oil (2) Clock (1) Door trim panel (2) Front bumper (1) Rear bumper (4) Brake pads (1) Shift knob (2) Fuel pump (4) Car door (1) Power window switch (1) Instrument cluster (2) Radiator (1) Heater core (1) Wheel (2) Fuse box (3) Seat (2) Crankshaft position sensor (1) Side mirror (2) Engine mount (1) Brake drums and shoes (3) Windshield wipers (1) Cylinder head (1) Steering wheel (6)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos