Instructions for Removing the Fuel Pump on a Fiat 600

Model: Fiat Seicento MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fuel pump

This video is currently unavailable

This video shows the main instructions for removing the fuel pump on a Fiat 600. First, access the rear of the car and remove the rear seat by lifting it upwards; then remove the upper cover of the immersion pump and disconnect the electrical connector of the fuel level indicator and the fuel hose.

At this point, unscrew the screws securing the pump, which are located on the side, and extract it from the tank, as illustrated in the video; all that’s left is to insert the new one and reassemble everything!

Updated on 4 May 2026 by ScegliAuto

Other guides you may be interested in

Pump - Maintenance and repair on other vehicles

Fuel Pump - Maintenance and repair on other vehicles

Seat - Maintenance and repair on other vehicles

Frequently Asked Questions

Seicento 1998-2010 - How much does it cost to replace the float in the Fiat Seicento? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!

by ScegliAuto

Instructions for Removing the Fuel Pump on a Fiat 600

Related tutorials

Other guides you may be interested in

Frequently Asked Questions

How to Remove the Rear Seat of a Hyundai Tucson?

More videos