Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Seicento
    4. : How to replace the fuel pump of the Fiat Seicento

Fiat Seicento - Video tutorial

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Fuel pump
Operation: How to replace the fuel pump of the Fiat Seicento

Today we will see, in this video tutorial, the main steps that will allow us to disassemble and replace the fuel pump of the Fiat Seicento. First of all we access the back of our car and begin to disassemble and remove the rear bench, in order to access the fuel pump (which we find below); then we go to disconnect the electrical connector and the fuel hoses, as shown in the video. At this point we unscrew the ring nut of the pump to remove it and replace it with the new one, with the original spare part, applying the reverse procedure!


Posted on 28 May 2022 by ScegliAuto

    Frequently Asked Questions

    • Seicento 1998-2010 - What to do with the fuel pump problem on the Fiat 600? Read Answer
    • Seicento 1998-2010 - How to solve the Fiat Seicento float problem? Read Answer
    • Seicento 1998-2010 - How much does it cost to replace the float in the Fiat Seicento? Read Answer
    • Seicento 1998-2010 - How much does the petrol pump of the Fiat Seicento cost? Read Answer
    • Seicento 1998-2010 - How to replace the fuel pump in the Fiat Seicento? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos