Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump on a Fiat Seicento

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Fuel pump

How do you remove the fuel pump on a Fiat Seicento? First, lift the bonnet and secure it with the prop rod, then remove the engine soundproofing panel and disconnect the battery cables. Remove the rear seat cushions; unscrew the metal cap securing screws (if present) with a socket wrench, remove it from its seat, and cover the perimeter with absorbent paper to catch any fluid leaks. Disconnect the power connectors and the fluid circulation hoses. Finally, extract the fuel pump from its housing along with any attached components.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump in the Fiat Seicento
How to Replace the Fuel Pump in the Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) Today, we will see in this video tutorial the main steps that will allow us to remove and replace the fuel pump in the Fiat Seicento. First, access t…
How to Remove the Front Headlight of a Fiat Seicento
How to Remove the Front Headlight of a Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) Before starting, open the front bonnet of your Fiat Seicento. Begin by unscrewing and removing the bolts that secure the front headlight to the car. …
How to Remove the Door Panel from a Fiat Seicento
How to Remove the Door Panel from a Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) Before you can start, open the door of your Fiat Seicento. Begin by unscrewing and removing the screws that secure the door panel to the door itself.…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos