Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Seicento
    4. : Timing belt

Fiat Seicento - Timing belt

Timing Belt Fiat Seicento (1998-2010 / mk 1)

Fiat Seicento (1998-2010 / MK 1)
How to Replace the Timing Belt of the Fiat Seicento
The main instructions in this guide will illustrate the procedure for removing and replacing the timing belt and the water pump of the Fiat Seicento. First, …Read all…
Posted on 6 June 2026 by ScegliAuto
Fiat Seicento (1998-2010 / MK 1)
How to replace the timing belt of a Fiat
Today we will describe the steps to replace the timing belt of the Fiat Seicento. The first step is to remove the right front wheel and the wheel arch, in …Read all…
Posted on 19 December 2024 by ScegliAuto
Fiat Seicento (1998-2010 / MK 1)
How do you replace the timing belt of the Fiat Seicento?
In order to replace the timing belt of the Fiat Seicento, you need to open the hood so that you can access the left side of the engine block. You will also …Read all…
Posted on 9 May 2024 by ScegliAuto
Fiat Seicento (1998-2010 / MK 1)
Replacing the Timing Belt on a Fiat 600
Replace the timing belt if you have exceeded the mileage specified in the manual. Here’s how to remove the belt. Lift the car on a column lift; remove the …Read all…
Posted on 11 April 2026 by ScegliAuto
Fiat Seicento (1998-2010 / MK 1)
Replacing the Timing Belt on a Fiat 600
Prepare to replace the timing belt on a Fiat 600. Lift the car on a column lift; remove the front wheel and the right wheel arch liner. Once these operations …Read all…
Posted on 4 April 2026 by ScegliAuto
Fiat Seicento (1998-2010 / MK 1)
How to Time the Fiat 600
When replacing the timing belt, proper timing is absolutely essential, meaning aligning the references between the camshaft and the crankshaft to ensure the …Read all…
Posted on 3 March 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Shocks (2) Battery (3) Ignition coil (1) Air vents (1) Transmission (1) Spark plugs (4) Timing belt (6) V-belt (2) Air conditioner (1) Checks and maintenance (9) Dashboard (1) MAF sensor (1) Brake rotors (2) Headlight (4) Tail light (1) Fog lights (1) Air filter (2) Clutch (2) Light bulb (1) Interior dome light bulb (1) Antifreeze coolant (2) Instrument panel light (2) License plate light (1) Engine (1) Power window motor (1) Engine oil (2) Clock (1) Door trim panel (2) Front bumper (1) Rear bumper (4) Brake pads (1) Shift knob (2) Fuel pump (4) Car door (1) Power window switch (1) Instrument cluster (2) Radiator (1) Heater core (1) Wheel (2) Fuse box (3) Seat (2) Crankshaft position sensor (1) Side mirror (2) Engine mount (1) Brake drums and shoes (3) Windshield wipers (1) Cylinder head (1) Steering wheel (6)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos