Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt of a Fiat

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Timing belt

Today we will describe the steps to replace the timing belt of the Fiat Seicento. The first step is to remove the right front wheel and the wheel arch, in order to access the belt. The second step is to disconnect the vehicle's battery and open the coolant cap. The third step is to loosen the tensioner to remove the timing belt. We then remove the belt. The fourth step is to open the coolant tank valve to drain it and remove the water pump. The fifth step is to install a new water pump and the new timing belt.

Posted on 19 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the timing belt of the Fiat Seicento?
How do you replace the timing belt of the Fiat Seicento?
Fiat Seicento (1998-2010 / MK 1) In order to replace the timing belt of the Fiat Seicento, you need to open the hood so that you can access the left side of the engine block. You wil…
How to Replace the Timing Belt of the Fiat Seicento
How to Replace the Timing Belt of the Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) The main instructions in this guide will illustrate the procedure for removing and replacing the timing belt and the water pump of the Fiat Seicento.…
Replacing the Timing Belt on a Fiat 600
Replacing the Timing Belt on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Replace the timing belt if you have exceeded the mileage specified in the manual. Here’s how to remove the belt. Lift the car on a column lift; remov…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos