Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Seicento
    4. : How do you replace the timing belt of the Fiat Seicento?

Fiat Seicento - Video tutorial

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Timing belt
Operation: How do you replace the timing belt of the Fiat Seicento?

In order to replace the timing belt of the Fiat Seicento, you need to open the hood so that you can access the left side of the engine block. You will also need to remove the front right wheel and the corresponding wheel arch. This way, you will be able to locate the timing belt, which must be removed from its seat by loosening the central nut of the tensioner pulley. Then, you can insert the new timing belt and tension it properly. At this point, you can start the engine to check that everything is working correctly.


Posted on 9 May 2024 by ScegliAuto



Replacing the timing belt on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Let's get ready to replace the timing belt on a Fiat 600. We lift the car on a column bridge; we remove the front wheel, and the right wheel rocker.
How to replace the alternator belt in the Fiat Seicento?
Fiat Seicento (1998-2010 / MK 1) In this tutorial, we can see how to replace the alternator belt in the Fiat Seicento, a simple operation if you have good manual skills. First of all
Timing belt replacement on Fiat 600
Fiat Seicento (1998-2010 / MK 1) We replace the timing belt if we have exceeded the km written on the manual. Let's see how the belt is removed. We lift the car onto a column bridge;

Other guides that may interest you

    Frequently Asked Questions

    • Seicento 1998-2010 - When to replace the timing belt of the Fiat Seicento? Read Answer
    • Seicento 1998-2010 - How much does it cost to change the timing belt on the Fiat Seicento? Read Answer

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos