Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Seicento
  6. : Ignition coil

Fiat Seicento - Ignition coil

Ignition Coil Fiat Seicento (1998-2010 / mk 1)

Fiat Seicento (1998-2010 / MK 1)
How to Remove the Coil Wires on a Fiat 600

Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever located …Read all…
Posted on 8 April 2026 by ScegliAuto

Cigarette lighter (1) Airbag (1) Shocks (2) Battery (3) Ignition coil (1) Air vents (1) Transmission (1) Spark plugs (4) Timing belt (6) V-belt (2) Air conditioner (1) Checks and maintenance (9) Dashboard (1) MAF sensor (1) Brake rotors (2) Headlight (4) Tail light (1) Fog lights (1) Air filter (2) Clutch (2) Light bulb (1) Interior dome light bulb (1) Antifreeze coolant (2) Instrument panel light (2) License plate light (1) Engine (1) Power window motor (1) Engine oil (2) Clock (1) Door trim panel (2) Front bumper (1) Rear bumper (4) Brake pads (1) Shift knob (2) Fuel pump (4) Car door (1) Power window switch (1) Instrument cluster (2) Radiator (1) Heater core (1) Wheel (2) Fuse box (3) Seat (2) Crankshaft position sensor (1) Side mirror (2) Engine mount (1) Brake drums and shoes (3) Windshield wipers (1) Cylinder head (1) Steering wheel (6)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos