Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Seicento
    4. : Cigarette Lighter

Fiat Seicento - Cigarette Lighter

Fiat Seicento (1998-2010 / MK 1)
Replacement of the cigarette lighter fuse for the Fiat 600.
The cigarette lighter sockets are increasingly used as power outlets for small electronic devices, but the use of low-quality components can generate …read all…
Posted on 24 October 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (1) Shock absorbers (2) Battery (2) Coil (1) Air Vents (1) Spark plugs (4) Timing belt (4) V-belt (2) Air conditioning (1) Checks and maintenance (10) Dashboard (1) Mass air flow sensor (1) Brake discs (2) Headlight (4) Tail light (1) Fog lights (1) Air filter (2) Clutch (1) Light bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Dashboard light (2) License plate light (1) Engine (1) Window motor (1) Engine oil (2) Door panel (2) Rear bumper (4) Brake pads (1) Gear Shift Knob (2) Fuel pump (4) Door (1) Window lift button (1) Instrument cluster (2) Radiator (1) Passenger compartment heating radiator (1) Wheel (2) Fuse box (3) Seat (2) Crankshaft RPM sensor (1) Outside rearview mirror (2) Engine mount (1) Drums and shoes (2) Engine head (1) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos